AGM VRLA batteries

AGM BATTERIES

VLRA technology AGM Batteries

Deep cycle batteries deep cycle DC-EV series ENERPOWER

Stationary batteries with frontal attacks FAT ENERPOWER series

Automotive starter batteries AV series ENERPOWER

Batteries start high inrush HC series ENERPOWER

ENERPOWER has a wide range of AGM Vrla batteries (Valve Regulated Lead Acid).

The AGM stands for "Absorbed Glass Mat" and identifies batteries that contain within them liquid acid, but they have absorbent plates glass microfibre. This material traps battery acid like a sponge, increasing the efficiency of the battery in order to obtain better performance for the same size. Inside the AGM battery is a valve that automatically renews the production of energy without having to fill the battery with the addition of acid, and has the task to release gas in the event of overload.

The AGM technology allows to have sealed batteries (sealed) that avoid any acid spills in case they were to fall or tip over. Moreover, AGM batteries require no maintenance and do not require any adding of electrolyte.

AGM batteries are ideal for cyclic use (with many charge and discharge cycles) both for use in buffer mode, as for the UPS.

Benefits of AGM batteries

They require no maintenance.

Compact batteries and very resistant to mechanical stresses.

They can be mounted in any position. They can be used at high altitude or at sea, and have a good resistance to high temperatures.

The acid spills are limited in the event of breakage of the container. Thanks to the division of the plates of glass fibers, there is no danger of short circuit between cells.

Suitable for engines starting due to the high inrush currents.

They have a low self-discharge and a lower internal resistance than conventional lead-acid batteries, maintain a more constant voltage and load faster.